Turn elasticated corners into a flat rectangle that is easy to stack. This worked guide uses a small reproducible example so you can check the result before adapting it to your own task.
ก่อนเริ่มต้น
- A clean, dry fitted sheet
- A clear bed or table
คำแนะนำทีละขั้นตอน
Find two adjacent corners
Hold the sheet lengthwise with the elastic facing you. Put one hand inside each of two adjacent corners so the corner seams sit over your fingertips.
Nest the first pair
Bring your hands together. Flip one corner over the other so both seams lie on the same hand, then let the long edge hang straight.
Collect the remaining corners
Find the two lower corners and nest them in the same way. Bring the two nested pairs together, turning one pair over the other so all four corners sit together.
Make a rectangle on the bed
Lay the sheet down with the elasticated edge turned inward. Smooth the outer edges into a rough rectangle; the elastic can remain as a curved fold inside.
Fold for your shelf
Fold the long rectangle into thirds, then fold the shorter direction in half or thirds. Place the smooth folded edge toward the front of the shelf and check that the stack sits flat.
เคล็ดลับและการแก้ปัญหา
- Work on a large flat surface if holding all four corners feels awkward.
- The result needs to fit your shelf; it does not need perfectly sharp corners.
คำถามที่พบบ่อย
How should I adapt this guide to my situation?
Begin with the small example, use the instructions for your actual materials or equipment, and change one thing at a time so the result can be checked.
What should I check before finishing?
Fold the long rectangle into thirds, then fold the shorter direction in half or thirds. Place the smooth folded edge toward the front of the shelf and check that the stack sits flat.
